Malco Slik SiO2 473 ml

Malco SLIK SiO2 Paint Protection Spray

Malco SLIK SiO2 is a modern protective spray designed to provide quick and easy protection for your vehicle’s paint. Thanks to its SiO2 technology, it creates a protective hydrophobic layer on the surface that repels water and dirt and helps protect the paint from harmful environmental factors. At the same time, it significantly enhances the gloss and gives the body an attractive wet look reminiscent of professional ceramic coatings.

The product was designed so that any user can apply it without special experience or equipment. It can be applied to both wet and dry surfaces, which significantly reduces the time needed to treat the vehicle. After application, a smooth protective layer forms on the paint, causing water to bead up and easily roll off the surface.

SLIK SiO2 provides effective protection against UV radiation, which can cause long-term loss of gloss and gradual aging of the paint. The combination of protective and aesthetic properties makes it the ideal solution for regular exterior car care between waxing sessions or ceramic coatings.

Thanks to its ease of use and long-lasting protective effect, it is suitable for both everyday users and car enthusiasts who want to quickly achieve professional-looking results.

Key Benefits

Paint protection using SiO2 technology

Significant increase in surface gloss

Wet-look finish

Hydrophobic effect

Repels water and dirt

UV protection

Quick and easy application

Can be applied to both wet and dry surfaces

Smooth, streak-free finish

Long-lasting protection for up to 60 days

Suitable for regular car care

Technical Specifications

Product type: paint protection spray

Brand: Malco

Model: SLIK SiO2

Technology: SiO2

Use: protects and enhances paint gloss

Application: wet or dry surfaces

Water-repellent effect: yes

UV protection: yes

Duration of protection: up to 60 days

Curing time: at least 8 hours

Intended use: vehicle exterior

Application

Wash the vehicle thoroughly before application.

If necessary, use a clay bar to remove residual dirt and contaminants.

Spray the product directly onto the paint.

The product can be applied to both wet and dry surfaces.

Use a microfiber cloth to spread the product across the surface.

Then polish the surface with a clean side of the cloth until a high gloss is achieved.

For maximum effectiveness, allow the protective layer to cure for at least 8 hours.