DKK 0,00
(fragt pris: 0,00)
ATEN AP412-AT-G, 4.0 kanaler, 120 W, D, 3 dB, 30 mV, 200 ohm (O)
Varenr.: [25902104] | Producent: ATEN Technology | Model-nr.: AP412-AT-G | EAN: 4710469349683
Produktet har ikke et billede - illustrationen viser produktets kategori
Ikke på lager
Varen er ikke på lager. Mere info
Udsolgt
Varen er ikke på lager.
Brug funktionen ”Giv mig besked..." herunder for opdateringer.
Leveringsmuligheder - Vælges ved checkout
Instabox - Pakkeboks
Fri fragt
GLS - Pakkeshop
Fri fragt
GLS - Levering til hoveddøren
59,00
Afhentning i vores Pick-up point i Ringsted
Fri fragt
Vis alle leveringsmuligheder (4)
DKK
9.077,00
ex. moms 7.261,60
Total inkl. fragt
9.077,00
Giv mig besked når varen er på lager igen
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
Skal du bruge en reservedel til dit lydudstyr?
Vores konfigurator viser præcis de dele, der passer til AP412-AT-G - højttalerenheder, drivremme, pickupnåle, fjernbetjeninger, strømforsyninger og meget mere.
Find reservedele til din model- Dele til denne model på lager
- Levering 1-2 hverdage
- Originale og kompatible dele
Delivers 120W per channel and receives balanced/unbalanced mic/line-level signals to drive 4/8-ohm low impedance or 70/100V line loudspeaker systems
AP412 is a 4-channel DSP-equipped amplifier that delivers 120W per channel and receives balanced / unbalanced mic / line-level signals to drive 4 / 8-ohm low impedance or 70 / 100V line loudspeaker systems. It also supports Lo-Z / Hi-Z in Bridge mode to deliver higher power.
Configurable via intuitive WebGUI / ATEN Audio Wizard, the built-in DSP allows Speaker EQ, 5-band EQ, compressor, delay, limiter, and up to 20 presets for precise tuning and extensive audio system protection. The ground-lift switch helps eliminate unwanted hum noises from power circuit. Immersive sound experience is delivered without compromise on power efficiency with the Class D design. Customizable Auto Standby mode enables AP412 to automatically switch to “sleep” when the signal level falls lower than -40 / -50 dBu for 10 / 15 / 25 minutes.
With the system protection circuit, the amplifier is prevented from damages led by shorted outputs, over / under-voltage, high-frequency overload, and overtemperature. Plus, AP412 will be muted when the heat sink temperature exceeds the limit. The fanless design avoids fan noise and prevents dust from building up inside the chassis.
AP412 becomes compatible with Dante audio when working with AP901 expansion card or receives two more channels of mic / line signals with AP902 expansion card. It can be integrated with ATEN VK Control System via RS-232 / Ethernet for comprehensive control from a distance. The 1U casing is available for rack mounting. AP412 assures reliable amplification with professional audio quality and higher power delivery for larger commercial spaces.
AP412 is a 4-channel DSP-equipped amplifier that delivers 120W per channel and receives balanced / unbalanced mic / line-level signals to drive 4 / 8-ohm low impedance or 70 / 100V line loudspeaker systems. It also supports Lo-Z / Hi-Z in Bridge mode to deliver higher power.
Configurable via intuitive WebGUI / ATEN Audio Wizard, the built-in DSP allows Speaker EQ, 5-band EQ, compressor, delay, limiter, and up to 20 presets for precise tuning and extensive audio system protection. The ground-lift switch helps eliminate unwanted hum noises from power circuit. Immersive sound experience is delivered without compromise on power efficiency with the Class D design. Customizable Auto Standby mode enables AP412 to automatically switch to “sleep” when the signal level falls lower than -40 / -50 dBu for 10 / 15 / 25 minutes.
With the system protection circuit, the amplifier is prevented from damages led by shorted outputs, over / under-voltage, high-frequency overload, and overtemperature. Plus, AP412 will be muted when the heat sink temperature exceeds the limit. The fanless design avoids fan noise and prevents dust from building up inside the chassis.
AP412 becomes compatible with Dante audio when working with AP901 expansion card or receives two more channels of mic / line signals with AP902 expansion card. It can be integrated with ATEN VK Control System via RS-232 / Ethernet for comprehensive control from a distance. The 1U casing is available for rack mounting. AP412 assures reliable amplification with professional audio quality and higher power delivery for larger commercial spaces.